中文无码字幕在线观看,一级a爱做片观看免费一,91污在线观看一区二区三区,国产精品VIP一区

Industry News
Current location:News >> Industry News >> View Contents
Packaging Machinery three problems during the packaging process

Packaging process includes filling, wrapping, sealing and other major processes, and the associated processes before and after, such as cleaning, stacking and demolition. In addition, the package also includes a metered or stamped on the package and other processes. Mechanical packaging products can increase productivity, reduce labor intensity and the need to adapt to large-scale production and to meet hygiene requirements. Dongguan packaging machinery

It focuses on the following points:

First, shrink machine is slow or unable to rise to a higher heating temperature (160 degrees Celsius) What is the reason?

A: heater line is the main power line suction through a magnetic switch and then heating pipe, it should be the first detection of the suction magnetic switch contacts are all normal. The line does not pass one phase, the above phenomenon occurs. Such as a magnetic switch to normal suction can then check the meter, look at each phase of the machine are the same ohmic value. If the normal should be short-circuited. If all phases are turned on but the line or electric heating tube is still abnormal, replace the heater.

Second, the device is easy to shift the membrane material at work and was unable to properly feed feeding how to adjust?

A: In the case of membrane material in the device offset, the adjusted position and tension of the film roll balance bar are invalid, this problem can be resolved by the adjustment of the angle of the triangle. If the upper membrane material deviation from the clip feed chain, the triangle can be adjusted in the clockwise direction; the following layer membrane material deviation from the clip feed chain, the triangle can be adjusted in the counterclockwise direction. Dongguan paper packaging machinery

Third, the six-pack packaging cluster packaging, electric eye can not detect packaging, machine work easily cut to the packaging, how to adjust?

A: cluster packaging of each bottle gap will affect the electric eye to detect, when the electric eye level can be adjusted to detect the angle of the bevel. Can reduce the adjusted electric eye to detect the packaging clearance chance, thus avoiding the phenomenon appears indiscriminately.